This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

DAC37J82: Modelsim / Questa simulation model for JESD204 based converters

Prodigy 120 points

Replies: 3

Views: 200

Part Number: DAC37J82

Hi everyone,

Does anyone know if TI provides a Modelsim / Questa simulation model for JESD204 based converters? Also suggestions from others who would provide these simulation models would be appreciated.

Thank you very much.

  • Guru 66830 points

    Tyler,

    We have an ibis_ami or bsdl model available. Would one of these help you?

    Regards,

    Jim

  • In reply to jim s:

    Hi Jim,

    Thanks for suggesting those but I was looking for Modelsim simulation model. For example, if I'm using an FPGA to interface to this DAC through the JESD204B SerDes link, I want to simulate the behaviors of this device through this link. On the FPGA side, the model is available whether you're going from FPGA -> DAC or ADC -> FPGA, but TI doesn't seem to provide HDL models for behavior simulation.

    Tyler

  • Guru 66830 points

    In reply to TylerQN:

    Tyler,

    Sorry, but this is all we have to offer.

    Regards,

    Jim

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.