This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: ADS1261EVM
i have purchased a new ADC1261EVM to measure a sample voltage in millivolt range. after several try i managed to measure the desired signal. but the issue is that as the y axis scale is fixed to a default range automatically. is there any commands to zoom in or zoom out the y axis so that i can view the signals in desired range.
Thanks and Regards
Our ADS126x experts will get back with you early next week.
Regards,Collin WellsPrecision ADC Applications
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
Unfortunately, the Delta-Sigma EvaluaTIon GUI doesn't allow you to change the Y-Axis scale on the time-domain plot. The Y-axis is always auto-scaled.
However, it is possible to save the data to a text file and then import it into Excel, by clicking on the "Save As" button in the upper left corner of the Data Analysis Engine window.
I hope that is helpful.
Best regards,Chris HallApplications Engineer | Precision ADCs
Check out these helpful resources...TI Precision Data Converters | TI Precision Labs - ADCs | Analog Engineer's Calculator | Data Converters Learning Center | Selection Guide
In reply to Christopher Hall:
Thanks for your reply. I will manage wuth this.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.