Hello,
This post is related to :
https://e2e.ti.com/support/data-converters/f/73/t/807324?tisearch=e2e-sitesearch&keymatch=ads54j42
[Q]
My customer set the nyquist zone as follows.
0x680042 0x01 //2nd Nyquist zone select or 0x00 // 1st Nyquist zone select
0x68004E 0x80 //nyquist enable
0x680000 0x01 // reset digital. Must issue after writes to 6800h
0x680000 0x00 // clear reset
In this case, how long does it take to become operational after setting that setting ?
This is the information needed to design their software.
Best Regards,
Hiroshi Katsunaga