This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: ADS9224R
What's the meaning of Max spur(dBC) and Max spur(Hz) in ADS9224 GUI?
Maz spur(dBC)=20log(max_harmonic_rms/fundamental component_rms) ?
Max spur(Hz): the max harmonic frequency of input signal ?
Thanks and best regards, Charles Chen Applications Engineer | LED Drivers
Check out these helpful resources
LED Drivers ICs | LED Drivers Reference designs | LED Driver Basics Training series
The max spur is the largest frequency component besides the fundamental. The GUI is reporting the magnitude and the frequency of this spur in the Results table.
If you click on the checkbox at the top of the window called Mark Harmonics, the FFT will zoom in and show you the fundamental and first few harmonics with corresponding labels.
Also, note that with single SDO, the EVM cannot support the full 3-MSPS data rate, as indicated by Device Fs (Hz) = 2.61 MHz. This is due to the limitation in available SCLK frequency. Change the SDO Width to "Dual SDO." Then you should see the "Target" and "Achievable" sampling rate will match.
Applications Engineer | Precision ADCs
Are you working on a bio-potential application? Check out these helpful resources: ADS129x BIOFAQ | ECG Online Training
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.