This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

LM98620: Serial Communication feedback-problem...

Prodigy 40 points

Replies: 2

Views: 44

Part Number: LM98620

Dear all,I am using LM98620 in my project.During Serial communication i got all the register value through feedback(SDO) except 0X06 Register.In 0x06 register i sent value 0x02.But i am getting feedback through SDO Pin as 0x00.Kindly help to solve this issue.Thanks in advance.

  • Hi Kathir,

     Let me check and feedback to you by 24th Oct.

    Regards,

    Costin

  • In reply to Costin Cazana:

    Hi Kathir,

    This is expected, Reg6 will be reset to default. Most of the config register will not be reset with FSM reset bit ( Reg6_D1)

    R6_D0 will reset all registers.

    Regards,

    Costin

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.