• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 472 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1299EEGFE-PDK: Where/How to connect the electrodes for a single-channel signal acquisition

Katsue Fany
Prodigy 10 points
Part Number: ADS1299EEGFE-PDK
Other Parts Discussed in Thread: ADS1299

Hi,

I'm trying to find where/how (BIAS, Ref, Ch+, Ch-) I should connect the electrodes for a single channel signal acquisition. 

Thank you.

  • 0
    TI__Guru 66166 points
    Hello Katsue,

    Thank you for your post.

    Your measurement electrodes can connect to the right-hand side of J6 for whichever ADS1299 channel you wish to use. The BIAS electrode can be connected to the BIAS amplifier output at JP1[2]. You will not need a "reference electrode" in this configuration.

    Best regards,