• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 45 subscribers
  • Views 510 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS8588SEVM-PDK: ADS8588H version

ttd
Mastermind 8600 points
Part Number: ADS8588SEVM-PDK
Other Parts Discussed in Thread: ADS8588H,

Dear Technical Support Team,

Do you have a plan of "H" version  such as ADS8588HEVM-PDK?

I'd like to use 500ksps with EVM and GUI.

It it better to change I/F such as serial (maybe sampling rate is lower than parallel on user guide( ADS8588SEVM-PDK) ) with ADS8588H,

Best Regards,

ttd

  • 0
    TI__Mastermind 45805 points

    Hi ttd,

    ADS8588SEVM board is fully compatible with ADS8588H ADC. Please follow these steps:

    1. Replace the DUT with ADS8588H device on ADS8588SEVM board.
    2. Download ADS8588H EVM GUI (SBAC173A.zip):        https://www.ti.com/product/ADS8588H#design-development
    3. Connect the EVM board with PHI controller card in the PDK, then plug it into the USB port of your computer.
    4. Then, the ADS8588H EVM GUI will prompt you to check if this is intentional for the right DUT. When you confirm, the GUI will instruct you to insert the WP jumper and update the EEPROM automatically. After finish this operation, you can use them to evaluate ADS8588H device directly.

    Please let me know if you have any other question.

    Regards,

    Dale