• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 271 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TSW14J10EVM-CB for Xilinx zc706 board

ADS52J65EVM: ADS52J65EVM and TSW14J10EVM HSDC issue

fbe
Prodigy 10 points
Part Number: ADS52J65EVM
Other Parts Discussed in Thread: ADS52J65

Hi,

I have ADS52J65EVM and I'm trying to capture data using ZC706 board using TSW14J10EVM adapter module. However, on HSDC screen in drop down menu, at the ADC selection menu, there is no ADS52J65 to select.

I program ZC706 and ADS52J65EVM using related bit files and parameters. On ZC706 board, L and R LEDs are blinking but I never managed to make C LED blink.

Does HSDC require additional ini file for ADS52J65? If so, I can't find it. Any help is much appriciated.

Thanks.

  • 0
    TI__Expert 6040 points

    Fbe, 

    thanks for using TI's ADS device. right now, ADS52J65EVM doesn't support the 14J10 board. TSW14J56 is the official EVM for data capture. hope it will help you evaluation the ADS52J65 performance. 

    we understand you may need to verify the Xilinx JESD IP. we can have some off line discussion. please send email to mysecuresoftware_medical@list.ti.com

    Thanks!