This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Hopper , thanks for your response, I did not found any ware in that exactly, could u please tell me exact document or where do we fond or how to know ADC was done pre silicon verification or post silicon validation
Perhaps I do not understand what you mean by "pre-silicon verification" and "post-silicon validation". Since the device is released, this is final silicon. There is no "pre-silicon verification". As far as "post-silicon validation", that data is all compiled and presented in the released datasheet that you can find on the web.
--RJH
Thank you for rly , We found in ADC32RF45 data sheet 49 pin mentioned as GND , but in EVM sch , 49 pin connected with the name of SCAN_EN , is it create any issue ? we taught it was not verified so that i was asked above question.
sorry my poor English. thanks for understanding.
regards
No issues. The Scan_EN is for internal use only. In your design you can ground that pin consistent with the datasheet. --RJH