This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
The ADC32RF45 device is fully released. Datasheet, EVM, and other documentation are available on ti.com.
--RJH
Hi Hopper , thanks for your response, I did not found any ware in that exactly, could u please tell me exact document or where do we fond or how to know ADC was done pre silicon verification or post silicon validation
Perhaps I do not understand what you mean by "pre-silicon verification" and "post-silicon validation". Since the device is released, this is final silicon. There is no "pre-silicon verification". As far as "post-silicon validation", that data is all compiled and presented in the released datasheet that you can find on the web.
--RJH
Thank you for rly , We found in ADC32RF45 data sheet 49 pin mentioned as GND , but in EVM sch , 49 pin connected with the name of SCAN_EN , is it create any issue ? we taught it was not verified so that i was asked above question.
sorry my poor English. thanks for understanding.
regards
No issues. The Scan_EN is for internal use only. In your design you can ground that pin consistent with the datasheet. --RJH