• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 535 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Tsc2007

raquib akolawala
Intellectual 280 points
Other Parts Discussed in Thread: TSC2007

In TSC2007 I have currently gnd-ed the AUX pin but nothing of the pin as is mentioned in the datasheet.

I am not using any of the temperature functions.

Please let me if otherwise.

Thanks Regards

Raquib Akolawala

  • 0
    TI__Genius 9725 points

    Hello Raquib,

    AUX is an analog input pin and can be grounded if not used. If you would like to use AUX to measure an analog input,  send the command with [C3~C0] =0010b, refer to table 3. What exactly did you not get as mentioned in the d/s?

    As long as you do not send the TSC the temp reading command, the temperature measuring will not function. 

    Please free free to ask if anything further I may assist!

    Regards,
    Wendy F.