DAC38RF86: DAC38RF86

Mark Benton94

Part Number: DAC38RF86

We would like to discuss methods to maintain coherency and sync’ng across multiple DAC38RF86 devices. It's for a beam forming application. We'd like to calibrate the system initially but not undergo further calibration for the design's lifetime.

Is there an FAE who could review this application with us?

Thanks and Best Regards
Mark

[edit 10/19/17 9:44am] , [discussion 10/19/17 11:19am] [unlock 13:40]

over 6 years ago

0 LeonardEllis over 6 years ago

TI__Guru 71516 points

Hello Mark,

Wondering if this issue was ever resolved? Please advise and apologies for the much delayed response.

Regards,

~Leonard

0 Mark Benton94 over 6 years ago in reply to LeonardEllis

Prodigy 30 points

Hi Leonard,

I'm having a discussion with Brad Davis Thursday next week to discuss this synchronization concept.

Thanks for Asking.

Best Regards

Mark

0 LeonardEllis over 6 years ago in reply to Mark Benton94

TI__Guru 71516 points

Thanks Mark, that's good to hear. We'll go ahead and close this thread in that case. Again, apologies for it being 'lost'.

~Leonard

Data converters

Data converters forum

DAC38RF86: DAC38RF86