• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 54 subscribers
  • Views 2881 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Code size limit in MSP430 free version

Tom Russell
Prodigy 175 points

Is the 16k code size limit based on user code or the total listed in FLASH in the .map file?  I recall going over that limit without a problem.

Tom

  • 0
    TI__Guru*** 130875 points

    Hi Tom,

    it is the object code size that counts, so I believe that would include both.  There are some TI examples where a special exception was made to allow users to run the examples in the code size limited version.

    Best Regards,

    Lisa

  • 0 in reply to Lisa TI
    Prodigy 20 points

    Ok, I just updated the MSP430 compiler version to:

    MSP430 Compiler Tools    4.4.4    com.ti.cgt.msp430.4.4.win32.feature.group    Texas Instruments

    So now I go try and compile the TI-RTOS webinar lab 4 and I get:

    >> Compilation failure
    error #10269: output file "blink_target_BIOS.out" exceeds code size limit
    error #10010: errors encountered during linking; "blink_target_BIOS.out" not built
    gmake: *** [blink_target_BIOS.out] Error 1
    gmake: Target `all' not remade because of errors.

    What do I need to do to get this thing webinar lab to compile ?

    Randy