Error: Program "make" is not found in PATH when I Building NAND Flash Tool for DM8168.

SuitJune Young

When I use CCS 5.1.1,building nand flash tool for DM8168,following the http://processors.wiki.ti.com/index.php/DM816x_AM389x_PSP_Flashing_Tools_Guide#Building_NAND_Flash_Tool

I encountered a problem information:

Error: Program "make" is not found in PATH

this message appears in CCS console.

the nand flash src is from dvrrdk 3.5

And what causes this problem?

br~

over 12 years ago

Ki over 12 years ago

TI__Guru**** 473961 points

Hello,

Somehow the CCS default build command got reset to the Eclipse default. You can try following the steps written by MartinS in this post:

http://e2e.ti.com/support/development_tools/code_composer_studio/f/81/p/156035/565986.aspx#565986

Thanks

SuitJune Young over 12 years ago in reply to Ki

Genius 3985 points

thank you lee.

I had found that thread,and followed martin's suggestions(except installing CCS4.2),but it still didn't work.

Maybe it will be solved by installing CCS4.2,but accroding to the wiki page I mentioned,there is not a description that it has to install CCS4.2

Ki over 12 years ago in reply to SuitJune Young

TI__Guru**** 473961 points

SuitJune Young said:
I had found that thread,and followed martin's suggestions(except installing CCS4.2),but it still didn't work.

Could you show me a screenshot of the 'Build Settings' tab that Martin describes?

Thanks

Code Composer Studio™︎

Code Composer Studio forum

Error: Program "make" is not found in PATH when I Building NAND Flash Tool for DM8168.