• Locked Locked
  • Replies 1 reply
  • Subscribers 53 subscribers
  • Views 1509 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/CC2650MODA: Using CC2650 Launchpad with XDS110 to debug a CC2650MODA

Sami Gharbia
Prodigy 10 points
Part Number: CC2650MODA

Tool/software: Code Composer Studio

I am trying to debug a board with CC2650MODA mount using the CC26550 Launchpad

I take a picture to show the connection

I have this problem displayed

I have already the same problem when i install the Emulation package 6.0.407.6 

  • TI__Guru**** 169234 points
    Hi,

    Please apologize for the delay; are you still having this issue?

    If so, at first glance you need to power up your boosterpack - I am pretty sure the JTAG cable alone will not provide power to the device.

    Also, check if the JTAG cable is not inverted.

    Unfortunately I don't have the same launchpad as you to know the exact pinout of this connector (mine is Rev 1.1).

    Hope this helps,
    Rafael