Access violation at address 009B6769 in module tina.exe

KECHAN

Prodigy 200 points

Other Parts Discussed in Thread: TINA-TI

Hello.

I tried install macro model in "Infineon - PSpice - IGBT - TRENCHSTOP5 - F5.lib" at Tina-Ti 9

and simulate model "IGP40N65F5_L2" in "Infineon - PSpice - IGBT - TRENCHSTOP5 - F5.lib".

Import Pspice net and compile --------- no error

New Macro Wizard --------- Access violation at address 009B6769 in module tina.exe

Any thoughts?

Thank you.

over 9 years ago

0 Britt Brooks - Online Design Tools over 9 years ago

TI__Mastermind 41310 points

Kechan,

I will take a look at the model.

Britt

0 Britt Brooks - Online Design Tools over 9 years ago in reply to Britt Brooks - Online Design Tools

TI__Mastermind 41310 points

Kechan,

Please try the attached .TSM file. It can be used with the Insert--> Macro feature in TINA-TI.

Britt

IGP40N65F5_L2.TSM

0 KECHAN over 9 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 200 points

Hello Britt,
I insert "IGP40N65F5_L2.TSM" in Macrolib.
I exchange to this macro and simulate.
Then TINA-TI is stopped.

Next I edit new circuit diagram and simulate.
TINA-TI is stopped,too.

Best regards, Kechan

0 Britt Brooks - Online Design Tools over 9 years ago in reply to KECHAN

TI__Mastermind 41310 points

Kechan,

Could you provide the .TSC file you are using?

Britt

0 KECHAN over 9 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 200 points

Britt,

I insert "IGBT_IGP40N65F5_Infenion.TSC".

Kechan

IGBT_IGP40N65F5_Infenion.TSC

0 Britt Brooks - Online Design Tools over 9 years ago in reply to KECHAN

TI__Mastermind 41310 points

Kechan,

Sorry for the delay. If you set the DC absoulte current limit to 100n and change the Always start Source step to Yes:

The simulation should run correctly.

Britt

0 KECHAN over 9 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 200 points

Britt,

I change analisys parameter and simulate.

TINA-TI is stopped (Humg up) in same way.

I insert changed file "IGBT_IGP40N65F5_Infenion.TSC".

Kechan

1805.IGBT_IGP40N65F5_Infenion.TSC

0 Britt Brooks - Online Design Tools over 9 years ago in reply to KECHAN

TI__Mastermind 41310 points

Kechan,

The .TSC file you provided worked well with Transient and DC analysis. Please check your version of TINA-TI. The latest version on the web is 9.3.100.244. If you do not see this version when you click on Help--> About from the TINA-Ti window, download the .zip file from the web and update your version of TINA-TI.

I am using the latest version of TINA-TI. It does take a few seconds to start on my machine.

Britt

0 KECHAN over 9 years ago in reply to Britt Brooks - Online Design Tools

Prodigy 200 points

Britt,

I check TINA-TI JAPANESE I use , this latest Version is 9.3.50.40.

I install TINA-TI English Version 9.3.100.244.

I simulate correctly by TINA-TI English Version.

Thank you.

Regards,

Kechan

Simulation, hardware & system design tools

Simulation, hardware & system design tools forum

Access violation at address 009B6769 in module tina.exe