TLV733P: Requestiong for Pspice model

Kiran,

Please edit the files you have downloaded for these devices (the unencrypted PSpice model .lib files) and remove the PARAMS: from the following line:

Is currently:

X_U2         0 OUT d_d PARAMS:

Should be:

X_U2         0 OUT d_d

This is explained in the following FAQ:

See the section on Syntax Incompatibilities. There should be only one instance of this in each of the .lib files you have downloaded.

After you have made the change, TINA-TI will import the file properly.

I have not downloaded TLV73330P Unencrypted PSpice Transient Model, i have downloaded ony TLV73330P PSpice Transient Model and that is not importing into my TINA. It would be really helpful if you could brief out the steps for the same please.