This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPLCRDC4422EVM: V-by-One bits per pixel

Part Number: DLPLCRDC4422EVM
Other Parts Discussed in Thread: DLP470TE, , DLPC4422

Hello all,

from the DLPC4422 data sheet we see that it supports 8,9 and 10 bits per pixel. We want to drive the DLPLCRDC4422EVM (connected to a DLP470TE EVM) through V-by-One with an 8 bits per pixel input signal. Where can this be set? In the DLPC4422 GUI V1.0 in the "Source" page, there is the "Port Configuration" Group, there's a SRC_24_BITS option, is this the right place to set this?

Thank you for advice and best regards,

Matthias