Can I use DLPM2000EVM for near-eye display in my smart glasses (wearable) ???

Ekagra,

Thanks for your interest in our DLP technology.

You may want to start by reviewing our App Note on Near Eye Display applications to get familiar with using DLP chipsets for smart glasses type applications:

https://www.ti.com/lit/an/dlpa051a/dlpa051a.pdf 

The DLPM2000EVM is a standalone optical engine which employs the 0.2" nHD DMD (DLP2000), which may be a suitable candidate for smart glasses application depending on your requirements. However, I would note that unlike the DLPDLCR2000EVM, the DLPM2000EVM does not come with the formatter electronics. As such, you will need to design the PCB which accompanies the DMD (including the controller and power management IC) yourself. In addition, you may need to come up with a waveguide solution either by purchasing from AR module suppliers or designing one yourself.

You can find a list of AR module suppliers below:

Coretronic: https://vsbg.coretronic.com/en/product-applications/wearable-display-solutions/sub-products-platforms/optical-engine-module

Dispelix: https://www.dispelix.com/dispelix-announces-strategic-projector-partnership-with-coretronic-corporation/

Digilens: https://www.digilens.com/design-v1-developer-smartglasses-accelerate-head-worn-ecosystem/

WaveOptics: https://enhancedworld.com/products/modules/

I hope this helps.

Regards,

Philippe Dollo

Hello Ekagra,

I am glad that your questions were answer by our team.  Appreciate your feedback. 

Please reach out us if you need further help.

regards,

Vivek