• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 27 subscribers
  • Views 174 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC3470: Firmware for 2 LEDs DLPC3470 (DLP2010EVM-LC)

Vladimir Zhukov
Intellectual 370 points
Part Number: DLPC3470
Other Parts Discussed in Thread: DLPDLC-GUI

Hello!

When creating a static image (picture) using a micromirror matrix in the When creating a static image (picture) using a micromirror matrix in the DLP2010EVM-LC demo board. 

1. How to make a firmware for DLPC3470 with two LEDs (two lasers) operating mode?
Standard firmware is available for one or three LEDs.

2. How can you set different durations for positioning micromirrors, synchronization of two LEDs (two lasers)?

3. How to upload new firmware?

Best regards, Vladimir Zhukov.

  • 0
    TI__Genius 16840 points

    Hi Vladimir

    Are you using this EVM for display or sensing application?

    1) We can create and share a firmware image with you via a download link. I sent you a friend request so we can discuss privately.

    2) Can you elaborate on this question? the patterns and exposure time can be modified for internal and external pattern streaming in the DLPDLC-GUI. For a display application (traditional images and video) I believe we can also include 2 LED looks. you can also use the default looks, but there will be ~33% dark time (the time when the 3rd LED would normally be illuminated)

    3) this can be done on the Firmware page of the DLPDLC-GUI

    Regards,

    Arthur