DLP3010LC: Create 1D Pattern

HF NG

Prodigy 20 points

Part Number: DLP3010LC

How to create a 1D pattern? Which software could generate this?

over 1 year ago

0 Philippe Dollo over 1 year ago

TI__Mastermind 28035 points

Hello User,

Welcome to the E2E forums and thanks for your interest in our DLP technology.

Can you be more specific on what you are trying to do. If your interest is in generating 1D patterns for use with our Light Control EVMs, I believe you are looking at the correct tool (the DLP Display and Light Control GUI).

For more information on this tool you can consult the user's guide: https://www.ti.com/lit/ug/dlpu074a/dlpu074a.pdf

You can also check out the DLP Pico FAQ page for more guidance on using the GUI with the DLP2010-LC, DLP3010-LC and DLP4710-LC EVMs: https://e2e.ti.com/support/dlp-products-group/dlp/f/dlp-products-forum/729968/faq-light-control-evms-dlp4710evm-lc-dlp3010evm-lc-and-dlp2010evm-lc

I hope this helps.
Regards,

Philippe

0 HF NG over 1 year ago

Prodigy 20 points

Hi Philippe,

Thanks for your reply.

Where can I generate 1 or 8 bit depth 1D pattern image in order to add into pattern set as explain at below?

e2e.ti.com/.../faq-light-control-evms-dlp4710evm-lc-dlp3010evm-lc-and-dlp2010evm-lc

0 Philippe Dollo over 1 year ago in reply to HF NG

TI__Mastermind 28035 points

HF NG,

To generate 1D pattern image you should use DLP Display and Light Control GUI as documented below:

https://www.ti.com/lit/ug/dlpu074a/dlpu074a.pdf

Are you having difficulties with the above software?

Regards,

Philippe

0 HF NG over 1 year ago in reply to Philippe Dollo

Prodigy 20 points

Hi Philippe,

Yes, I'm having problem generate the bmp file before adding it into pattern set.

How to generate below yellow highlighted image in bmp format?

0 Arthur Brown over 1 year ago in reply to HF NG

TI__Genius 12195 points

Hi you can create a 1D .bmp image in a couple ways.

1) you can use a tool such as MS Paint to create a black/white monochrome image and save as a .BMP

2) you can take an image that is the desired pattern and pass it through an online .bmp converter. I found that https://online-converting.com/image/convert2bmp/ Works well for 1D patterns

Regards,

Arthur Brown

DLP®︎ products

DLP products forum

DLP3010LC: Create 1D Pattern