• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 26 subscribers
  • Views 234 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP6750

Gang Li
Prodigy 20 points

Issue on the DLP6750, only half of the PLM works as shown in the attached. There should be another letter shown in the left half of the image but only right half is working right now. I set the lab power supply with 1.3V voltage, and 8 mA current limit. Some other setting in the GUI is shown as the attached screenshots. 

Thanks