DLPLCR4500EVM: DLPLCR4500EVM-GUI Multiple Image

Mark Philip Felipe

Part Number: DLPLCR4500EVM

Hi Team, trying to upload multiple images at once to the firmware that will be uploaded into the PRO4500. But we cannot find a way to upload multiple images at once and instead have to add each image separately.

Thank you.

-Mark

over 1 year ago

0 Cody Smith over 1 year ago

TI__Expert 3400 points

Hi Mark,

We will look into this further and get back to you by middle of next week.

Thank you,

Chris

0 Akhil Guntumadugu over 1 year ago

TI__Intellectual 2375 points

Hi Mark,

You can only add one image at a time using the GUI by default. Since the Source code for the GUI is available with GUI installation. If you are familiar with QT GUI development then you should be to develop the feature of adding the selected images one by one in sequence as per your requirement.

Note that developing your own feature by modifying the source code is beyond our support and we are not responsible for the changes you have done.

Regards,

Akhil

DLP®︎ products

DLP products forum

DLPLCR4500EVM: DLPLCR4500EVM-GUI Multiple Image