This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP5530PGUQ1EVM: Projection imaging size

Part Number: DLP5530PGUQ1EVM
Other Parts Discussed in Thread: DLP5530PROJQ1EVM

Hello -

In DLP5530PGUQ1EVM Evaluation Module User's Guide,I saw that the throwing distance of the optical module is 70mm.But it seems a little small for us.

Is there any way to increase the imaging size by adjusting parameters?

Or can it only be solved through the optical path?

Do you have any solutions you can share with us?

By the way, as for another process of mine, I hope to get the correct firmware as soon as possible due to the urgency of the leadership.Sincerely hope you can understand!

Here is a link to another process of mine.

DLP5530PGUQ1EVM: The role of the firmware - DLP products forum - DLP®︎ products - TI E2E support forums

Thanks again!



  • Hello Yang -

    The throw distance is fixed by the design of the projection lens. There is no parameter to increase it. If you're looking for a longer throw distance, we also offer the DLP5530PROJQ1EVM.

    Note I will respond in the other thread about the firmware.