This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP4710LC: Replacement of IT6801 with TI HDMI Reciever

Part Number: DLP4710LC
Other Parts Discussed in Thread: DLP4710EVM-LC, DLPC3479

Hi,

We have Idenfied DLP4710-LC for our requirement

i have went through design files of DLP4710EVM-LC, also procured two nos of kits for evalaution

My video input resolution is 1080p30 for which a DVI Rx is sufficient i may not require a HDMI Rx.

I wish to know following things

1. Can we replace the HDMI reciever IC with any TI IC(DVI Rx) ? is anything available ?

2. I wish to use the same binaries used for the DLP4710EVM-LC and replace the HDMI reciever IC with a DVI Rx IC

3. if above 1&2 are not possible and i am abided to buy on IT6801 kindly provide contact details of company

  • Hello Shyam,

    These system were built and tested with the IT6801 specifically. The IC is used to format the data coming directly from the HDMI port and getting it to work with the parallel port of the controllers. If there is a receiver, it would need to be able to handle the requirements that are listed for the parallel port in the DLPC3479 controller datasheet.

    Our EVMs are built with this IC and TI only tests with it. TI can't ensure the behavior of your system if you don't want to use the IC.

    Please give us a response on how you want to proceed.

    Regards,

    John