Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP5531Q1EVM: DLP5531Q1EVM

Part Number: DLP5531Q1EVM

After I bought DLP5531Q1EVM module, I wanted to communicate with STM development board through SPI, but the value returned by DLP module always told me the communication error. How can I solve this problem?Directive contrast.docx

  • Hi Cherry,

    It looks like communication is working as expected but at some point you're issuing a short status read without completing it. Can you clear the short status error bits:

    and then read short status again and see if you're still seeing an error? If so, we may want to log all SPI transactions and see what's happening earlier to cause the error.

    -Jake