• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 29 subscribers
  • Views 206 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP9000X: Max Illumination's difference

Uryyy
Expert 1840 points
Part Number: DLP9000X
Other Parts Discussed in Thread: DLP9500,

Hi TI's everyone,

Regarding "ENVIRONMENTAL For Illumination Source Between 400 nm and 420 nm" in the datasheets of DLP9000X and DLP9500, DLP9000X's illumination is maximum 10W/cm2 and DLP9500's illumination is maximum 11W/cm2. What are the backgrounds and causes of such differences(10W/cm2 VS 11W/cm2)?

  • +1
    TI__Expert 3700 points

    Hi Uryyy,

    The specifications are generated from internal test data at the time of the release of the device, and are dependent on design and application use conditions. We do occasionally gather information from the market to see if there is a request to increase power densities. It is not our goal to make each power density the same for every device.

    Do you have a specific question or use case for these devices regarding power density?

    Thank you,

    Natt