DLPDLCR4710EVM-G2: Questions on EVM

Mohamed Hellal

Part Number: DLPDLCR4710EVM-G2

DLP LightCrafter Display 4710 EVM few questions in regards to this module:

DMD output brightness is 600 lumen (as specified in User guide) or 1000 lumen ? How is the test following ? Is this test following a norm ?
Field of view angle of the EVM ?
Size of the EVM
Weight of the EVM information if available ?

0 John McKnight over 1 year ago

Hello User,

1.) Can I ask where the 1000 lumen number came from? We can look into test methodology.

2-4.) We will have to get back to you after we collect this information.

Regards,

John

0 Mohamed Hellal over 1 year ago in reply to John McKnight

Hi John,

Background of the question is link to this roadmap picture, attached

0 Lori Wang over 1 year ago in reply to Mohamed Hellal

Hello Mohamed,

Please see the following responses:

1. If you are using the light engine comes with the EVM, then the typical brightness at Red LED 12 A, Green LED 16 A, and Blue LED 16A is 600 lum.

2. Field of view:

HFOV is ~39.6 degrees.

VFOV is ~22.9 degrees

3. Please refer to the Assembly drawing on the reference design page.

4. I don't think we have a accurate information on the weight of the EVM, but as I measured, the weight of the EVM is 1076 g.

I hope these help.

Regards,

Lori

DLP products forum