DLPC7540: DLPC7540 Disp external mode brightness issue

Hello Xinmin Wu,

                       Thanks you for posting your question on e2e forum.

                        Have you tried adjusting the brightness parameter from the Image Processing Tab as below.

Thanks

Pavan.

Hi  Pavan,

      Thank you very much for your reply.

      This parameter is set to 100-255, but the overall whitening of the picture, the brightness of the white field and the color coordinate have not changed.

Are there other parameters that can be adjusted?

Thanks 

Xinmin Wu

Hi Xinmin Wu,

           Do you see any change in the brightness when values are set between 0-100?. Did you try adjusting the contrast values & RGB Offsets used..

            You can also try adjusting the System look to 1 to enable the Brilliant Color algorithm

Thanks

Pavan.

Hi  Pavan,

     Thank you very much for your reply.

    1. I can see the whole picture turn white when adjusting the brightness parameter, but the brightness of the white field and the color coordinate have not changed;

    2. when adjusting the contrast parameter, the brightness of the white field  have change, but the maximum brightness does not change.

    3.I try to adjust the System look to 1 to enable the Brilliant Color algorithm, but have an error, can not to set the value.

Hello Xinmin wu,

                  We are able to reproduce this issue at our end. We started looking into this issue and debugging the possible causes.

                  We look forward to get back with answers before end of this week. We appreciate your patience here, Thank You!

Regards,

Pavan.M