This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP6500FLQ: light crafter 6500

Part Number: DLP6500FLQ
Other Parts Discussed in Thread: DLPC900

Hi Team, 

When I go into system settings and put the LED in manual mode, I get a box of light that comes out of the DMD even though there isn't a pattern selected, the light goes off when I put the LED in automatic mode but then I can't seem to adjust the power. Regardless of the LED mode, I still see that box of light when I start a pattern that I've added in pattern mode. For example, if I add a line, I get a box of dim light all around the pattern so it's not a very clear on/off around the pattern. Do you have a specification for this? Do you have examples of small patterns that you've done with the instrument so I can see what the image looks like? Lastly, are there image creating programs that are non-compatible with this software or is there maybe one you recommend more?

Thank you.


  • Hello Mark,

    To verify, you are using 6500FLQ from InVision?  I assume this is a DLPC900 controller.

    I will send you an email, so that you can send me a couple of the images you are using to load the system up.