This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC3436: PWM_IN and COM_OUT in TIDA-080009 (0.23 1080p EVM)

Part Number: DLPC3436
Other Parts Discussed in Thread: TIDA-080009, DLPA2005, DLPDLCR230NPEVM, TIDA-080003

PWM IN +RC filter is used as the comparator’s reference voltage and act as “ADC” for DLPC3436 by harvesting COM_OUT base on one of the input sources that the MUX inside DLPC2005 selected and sent to the comparator.  

According  to TIDA-080009 (0.23 1080p EVM) reference design, PWM_IN is NC but COM_OUT is connected to DLPC3436.

Need your confirmation if DLPA2005 ADC function is still used? if no PWM_IN from DLPC3436, how to make this function work?

  • Hello User,

    The ADC is not used in the DLPDLCR230NPEVM design. The only feature that may have used this pin would be a thermistor. There is not thermistor used with this design either.

    TIDA-080003 uses a DLPA2005 with a thermistor. This would give you an example of the required circuitry.