Tool/software:
Dear TI
Our projector project consists of chips DLPC3430+DLPA2005+DLP2010, but DLPC3430 initialization failed.Host_irq remains at a high level all the time.
The timing meets the requirements of the specification sheet
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Davion,
Please check the following:
1. The TI DLP Pico Boot Diagnostic Tool (link)
2. All DLPA2005 boot signals/voltages come up properly. (figure below)
Best,
Maximus