• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 28 subscribers
  • Views 71 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP2000: VIH VIL Specification not available in datasheet

Athiamaan Rajan
Prodigy 31 points
Part Number: DLP2000

Tool/software:

Hi TI,

I've been working on a project involving the DLP2000 EVM, and I noticed that the datasheet for the DLP2000 lacks information regarding the voltage high (VIH) and voltage low (VIL) levels for inputs. Given that the device functions primarily as an output device, I’m curious why the VIH and VIL specifications were omitted from the document. Could you clarify the reasoning behind this or guide me to where this information might be found?

Thanks,

Athiamaan

  • 0
    TI__Expert 8780 points

    Hello User,

    Welcome back to the E2E forums and thank you for your interest in DLP® technology. We hope to assist you with your questions.

    Please see the following specifications from the DLP2000 datasheet. This is an older DMD so the naming convention is different.

    Regards,

    Alex Chan