Hello User,
Welcome to the E2E forums and thank you for your interest in TI DLP Technology. We hope to assist you with your questions.
Unfortunately I do not believe this is possible.
The DLPC2607 (which is the controller for the DLP2000 DMD) has in the software programmers guide (https://www.ti.com/lit/pdf/dlpu013) only the following DMD control command to either park or unpark the DMD which correlates to the DMD micromirrors either being off or on. We cannot control individual angle amount of the micromirrors or positions outside of this.
This is from DLP2000 datasheet. https://www.ti.com/lit/gpn/dlp2000
Regards,
Alex Chan
