DLPC410: Programing file for the DLPC410 configuration SPI flash

? ??

Part Number: DLPC410
Other Parts Discussed in Thread: DLPLCRC410EVM

Tool/software:

Hello,

Would you be able to provide a programming file for the DLPC410 configuration SPI flash?

Sorry for posting a new thread on the same request, since there are already several, but when I asked TI customer support in Japan, they told me to make a request through E2E, so I did here.

Thanks,

Tanaka

9 months ago

0 Michael Ly 9 months ago

TI__Expert 6840 points

Hi Tanaka,

Thanks for reaching out. Are you using a custom design, or are you using the TI EVM? If you are using the DLPLCRC410EVM, please let us know which version (and maybe a picture) so we can help you out. Just as important is which SPI flash part are you using? This may impact success of the flash config file.

I will be reaching out to another one of our experts on this soon as well, as I am subbing in his place for today.

Regards,
Michael Ly

0 ? ?? 9 months ago in reply to Michael Ly

Prodigy 30 points

Hi Michael,

I am designing a custom board.

I pressed the "Ask a related question" button in the DLPLCRC410EVM thread, but I didn't realize it was the wrong button. This might have caused some confusion. If possible, could you remove "DLPLCRC410EVM" from "Other Parts Discussed in Thread" ?

I am considering using the S25FL064L (Infineon) SPI flash. Since the data will be written directly to the memory IC, the SOIC-8 package is more convenient. Although it is not listed in the DLPT030 document, I suppose it should work.

Thanks,

Tanaka