This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RE: DLPC3479: Max exposure time

Other Parts Discussed in Thread: DLPC3479, DLPC3478

Hello Aaron,

Is there next range(sequence) over 4168usec exposure time? My customer wants to set exposure time as 6.398msec"6.6msec-171usec(min pre dark time)-31usec(min post dark time)" . Is that possible?

Regards,

Uryyy

  • Hello Uryyy,

    If the customer is utilizing DLPC3478 chipset they have additional sequence timing ranges but the DLPC3479 chipset does not have a difference sequence timing range.

    Additional notes under the table in the Firmware Selection readme for both controllers explain that "longer exposure times will operate with decreased timing accuracy and behavior is not guaranteed."

    Best,

    Aaron