DLP4710: Requesting Linear de-gamma curve firmware for DLP4710A + DLPC3439

Good afternoon Ramachandiran Aynkaran ,

Thank you for reaching out and using the E2E forums! Your thread seems to have been assigned under a different group, but an expert from our team will review the thread and will get back to you shortly. I apologize for the delay.

Best Regards, 

Tristan Bottone

Hello  Ramachandiran Aynkaran,

The DLP LightCrafter Display GUI does not have a command to change the degamma curve and we will need to create a firmware image file with the linear de-gamma curve as default, then you can reprogram the image file to your custom board and test it. 

Can you please accept my friend request and I can support you there?

Regards,

Lori 

Hello Lori Wang,

I understand that you need to create new firmware.

I have accepted your friend request. 

Hello Ramachandiran Aynkaran,

Thank you for accepting the friend request. I'll contact you in the private message and share you the custom firmware image file. Please allow me sometime to work on it and will prove the support next week.

Thanks,

Lori 

Hello Ramachandiran Aynkaran,

I've shared the firmware image file with the linear degamma curve in the private message. Please check with it. 

Regards,

Lori 

Thank You Lori Wang,

I will try this and update the results.