DLPDLCR160CPEVM: DLPDLCR160CPEVM

Athi KAmesh

Tool/software:

Hi Friends,

I load the images in memory. It's working. but it loads the images very slowly to make it fast and load the images. and the image shows the time; that means the delay time. What is the maximum time to set?

8 months ago

0 John McKnight 8 months ago

TI__Expert 7035 points

Hello User,

The load time is slow since the image has to be read from the card by the MCU and sent to the controller. There is not much that can be done to speed this process up to have the images show immediately.

I do not understand the request. Can you rephrase?

Best,

John

0 Athi KAmesh 8 months ago

Prodigy 20 points

What is the maximum delay time in one image to another image.

0 John McKnight 7 months ago in reply to Athi KAmesh

TI__Expert 7035 points

Thank you for the feedback. Will look at the code and come back to you.

0 John McKnight 7 months ago in reply to John McKnight

TI__Expert 7035 points

Hello User,

With default configuration the max delay between one SD card image to another is 50 seconds.

Bet,

John

DLP®︎ products

DLP products forum

DLPDLCR160CPEVM: DLPDLCR160CPEVM