• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 360 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Product Number DMD Controller Board

Johann Hynek
Prodigy 50 points
Other Parts Discussed in Thread: DLPC350

I fried a capacitor on the DMD Controller board of the LightCrafter 4500. The light engine and DMD Chip however should still be fine, and I'm wondering whether I can just replace the whole circuit board (with power supply connector, USB, HDMi, DLPC350, etc.  and reuse the light engine, DMD etc. from the old LightCrafter 4500.

Also could anyone tell me the product number for this circuit board, so I can buy it?

Thank you!

  • 0
    TI__Genius 9935 points

    Johann,

    Welcome to the DLP & MEMs E2E forum. Sorry for the delayed response.

    The Controller board for the DLP LightCrafter 4500 development kit is not available separately.

    Is it possible for you to replace the destroyed capacitor? Do you think that you damaged more than the capacitor?

    Could you tell me more about your application or project?