Cannot use Jtag on LCR6500

Frank(EP) Liu

Other Parts Discussed in Thread: DLPC350

When connecting the UM232H with LCR6500-> detect chain-> it shows error as below.

the boardfile.brd and flashdeviceparameters.txt is in DLPC900REF-SW-2.1.1\DLPC900REF-JTAG.

anything wrong here?

BR,

frank

0 Trevor Dowd over 9 years ago

Hi Frank,

I think you might be experiencing the same issue as the first part of this thread. Do you want to join in there?

Thanks,

Trevor

0 Frank(EP) Liu over 9 years ago in reply to Trevor Dowd

Hi Trevor,

I think that I found the issue. The original "BoardFile.brd" includes DLPC350 as below.

# DEVICE 1
#
CHAINID = 0
DEVID = 0x09209031
DEVICENAME = DLPC350

I remove all information about DEVICE 1. Then everything looks good. Thank you still.

BR,

frank

DLP products forum