Other Parts Discussed in Thread: DLP9500, DLP9000
DMD Active array dimensions given in datasheet 19.354 x 12.096 (W x H) (7.11 Micromirror Array Physical Caracteristics) from http://www.ti.com/lit/ds/symlink/dlp9000.pdf do not match with the ones in CAD file (19.15 x 14.36) as seen in Figure 1. I have concernes whether the given model is fully correct, because it can affect the precision/design of products. What is the solution for this problem?
All technical document source from http://www.ti.com/product/DLP9000X/technicaldocuments
Figure 1. CAD model active array dimensions