DLPC910: DLPC910 to DLPC9000X flex cable schematic

Helly Uryyy,

The flex cable used in the TI Design for the DLPC910, DLPR910, & DLPC9000X design is the same cable as used in the DLPD4X00KIT, DLPLCR6500EVM, and DLPLCR9000EVM.

Please look at this previous thread about the DLPLCR6500EVM.  It shows the cable number:

E2E - DLP6500FYE: About Flex cable of DLPLCR6500EVM

The second reference is the DLPLCR6500EVM reference design files located here:

DLP LightCrafter 6500 Reference Design - Inside the zip file drill down to "DLP6500-C900REFHW-1.2\2_Schematic\Cables\TI_Flex_Cable_schematic.pdf"

NOTE:  The signal names may be slightly different on the DLPLCR6500EVM design, but you can match the signal names to pin#'s on the cable to match the DLP910/DLP900X reference design:  

High Speed DLP Sub-system for Industrial 3D Printing and Digital Lithography Reference Design

I hope this helps.

Fizix