This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLPC3470: Firmware for combination of DLPC3470 and DLPA3000

Part Number: DLPC3470
Other Parts Discussed in Thread: DLPA3000, DLP2010, DLP2010EVM-LC

Hello everyone

I prototyped the board using the following parts.
Controller: DLPC3470
Driver: DLPA3000

The controller farm of DLPC uses the firmware "dlp2010evm-lc_7.3.1.img" of DLP2010 EVM-LC-FW.

However, the board's boot sequence does not work well and [HOST_IRQ] from the DLPC remains high and does not fall low.
[PARKZ] and [RESETZ] from DLPA appear to have been entered successfully.

Is it possible to use "dlp2010evm-lc_7.3.1.img" for the DLPA 3000?