This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP3000: When the command 4 is input, the camera is calibrated and the green light is projected, not the white light in the document.

Part Number: DLP3000

Hi, I need some help. I am trying to run <LCr3000_3D_Scanner_Application_v2/DLP_LightCrafter_3D_Scan_Application.exe>, but I have encountered some problems.

I use the document <TIDA-00361: Portable Point Cloud Generation for 3D Scanning Using DLP® Technology User's Guide, TIDU985A>. I am using Microsoft's LifeCam webcam. I was having problems with camera calibration in the order in the documentation.

Follow the prompts to enter command 4 to perform camera calibration. The projector does not project white light, but the projected green light.

Below is config_projector.txt

When I modify the value of LCR3000_PARAMETERS_PATTERN_LED_SELECT, modify it to BLUE, RED, and the projector will also project the corresponding color of light. However, how can I cast white light in an image document?


Thank you in advance.