DLPNIRSCANEVM: Determine Gas components concentration

Art Mecina

Part Number: DLPNIRSCANEVM

Hello Guys,

Good day.

Our customer wanted to know if DLPNIRSCANEVM is able to determine approximate concentrations of each component in a natural gas sample? And also how many components can it detect?

He is interested in finding a 0-100% of each:

Methane

Nitrogen
CarbonDioxide
Ethane
Propane
Water
HydrogenSulfide
Hydrogen
CarbonMonoxide
Oxygen
iButane
nButane
iPentane
nPentane
Hexane
Heptane
Octane
Nonane
Decane
Helium
Argon
(all components will be normalized to total 100%)

Thanks in advance!

Art

over 3 years ago

0 Cody Smith over 3 years ago

TI__Expert 3360 points

Hi Art,

Our team will look into this and get back to you soon.

Thank you,

Chris

0 Vivek Thakur over 3 years ago in reply to Cody Smith

TI__Mastermind 22830 points

Hello Art,

I want to reconfirm that you are referring to the following EVM:

www.ti.com/.../DLPNIRSCANEVM

The DLPNIRSCAN EVM has a very high signal to noise ratio 30,000:1. It can be used to solve similar problem. I also want to state that it an evaluation module , not an end product or spectrometer.

The EVMs is intended for development purposive only. If your customer's requirement is for a production use, then I would recommend that they contact our ecosystem partners like innospectra or a third-party solution providers like Keynote for an end product.

http://www.inno-spectra.com/

www.keynotephotonics.com/

Detecting concentration in natural gas -

Capability to detect concentration in natural gas will depend on the your system design and associated firmware/model. TI has not developed a solution for this. We do have several several ecosystem, partners who have expertise and have developed similar solution. You may want to contact them directly and explore if could provide a solution. Some of the partners you may want to contact are:

1. KS technology kstechnologies.com/nirscannano

2. Sagitto - https://cloud.sagitto.com/

3.Analyze IQ - https://www.analyzeiq.com/

Hope this answers your question.

regards,

Vivek

DLP®︎ products

DLP products forum

DLPNIRSCANEVM: Determine Gas components concentration