This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP2000: DLP2000 evaluation module

Part Number: DLP2000
Other Parts Discussed in Thread: DLPDLCR2000EVM,

Hi,

Does exist any module to control the DLP2000 without any integrated LEDs and lenses? I found just the DLPDLCR2000EVM but i need the DMD bare in order to shine it with my illumination system.

Moreover I cant find the wavelength widow of working of DLP2000. Is it limited by a window covering the entire DMD? would it be possible to remove this window? 

thank you

Luca Oggioni

  • Hi Luca,

    Welcome to DLP forum  and thank you for your interest in DLP technology.

    The DLPDLCR2000 EVM comes with an optical engine and DMD is integrated in the optical engine. If you want to drive DMD only, then you could buy the DLP2000 DMD separately from TI on-line store and use the board and flex cable from the EVM to drive DMD.

    www.ti.com/.../DLP2000

    DLP2000 DMD is designed for visible range from 400 nm to 700 nm. Please refer to section 6.4 , page 8 of DLP2000 DMD datasheet for operational wavelength. 

    www.ti.com/.../dlp2000.pdf

    The windows of the DMD is an integral part of the and it can not removed.

    regards,

    Vivek