DLP471TP: DLP471TPFQQ - Design review

Jonathan Geronga

Part Number: DLP471TP
Other Parts Discussed in Thread: DLPA3005, DLPC6540

Hi team,

Our customer is requesting for design review with their application with DLP471TP regarding 4k projector.
Please see the files below and let me know if they are okay.DesignDiagram.pdf BOM.xlsx

Thanks,

Jonatan

over 3 years ago

0 Philippe Dollo over 3 years ago

TI__Mastermind 28005 points

Jonathan,

Did you intend to send any design files in your post? I only see a block diagram and BOM information.

Regards,

Philippe Dollo

0 David Shakarov over 3 years ago in reply to Philippe Dollo

Prodigy 20 points

Hey Jonathan,

Thank you for reviewing my files.

As of now, I just have a block diagram, however, within the next week or so, I should have full schematics.

Would you be able to look at them then?

Regards,
David

0 Austin Snyder over 3 years ago in reply to David Shakarov

TI__Genius 12595 points

Hi David,

A member of our team will review the block diagram and give you feedback by EOD Friday (2/5)

Regards,

Austin

0 Jonathan Geronga over 3 years ago in reply to Austin Snyder

TI__Expert 7930 points

Hi team,

We would like to get an update on this thread.

Regards,

Jonathan

0 Mayank Khandelwal over 3 years ago in reply to Jonathan Geronga

TI__Genius 9971 points

Jonathan,

We will need some more time to update you with our findings.

We will try to get back by EOD 02/12.

Regards,

Mayank

0 Sanjeev over 3 years ago in reply to Mayank Khandelwal

TI__Mastermind 30875 points

Hi Jonathan,

We are going to release TI design based on the DLP471TP DMD, DLPC6540 controller, and DLPA3005 PMIC chipset. I would request you to wait until we publish the design. It will be a very good baseline for you to compare your design with TI reference. We plan to release the design end of this month or early march 2021.

Typically our customers design using TI reference chipset and we will help in case they find issue or clarification related to TI design, we don't review the full schematics or the design itself.

Thank you for your understanding.

Regards,

Sanjeev

0 David Shakarov over 3 years ago in reply to Sanjeev

Prodigy 20 points

Hey All,

Would it be ok if I send you all the schematics by this Monday and then we can finalize which TI chip would be best?

0 Philippe Dollo over 3 years ago in reply to David Shakarov

TI__Mastermind 28005 points

David,

Can you elaborate? Is the customer using a different part than the DLP471TP? Otherwise, I recommend you refer to the TI Design pending publishing per Sanjeev's comment above.

Regards,

Philippe Dollo

DLP®︎ products

DLP products forum

DLP471TP: DLP471TPFQQ - Design review