DLP230NP: Display controller specifications AND PMIC part numbers, select

zhang ping

Part Number: DLP230NP
Other Parts Discussed in Thread: DLPA2005

My requirement is micromirror array, diagonal size 0.23 or 0.2, display 1080p. I chose dlp230np. I need an overall solution.

1. Is there a dlp230np reference design on micro projection?

2. Can the selection of display controller specifications and PMIC part numbers recommend common typical materials?

0 Philippe Dollo over 3 years ago

Zhang,

Yes, there is a reference design for the DLP230NP chipset. You can find it at: https://www.ti.com/tool/TIDA-080009

I'm not sure I understand your second question. Are you looking for a PMIC recommendation? The reference design above uses the DLPA2005.

I hope this helps. Let me know if you have further questions.

Regards,

Philippe Dollo

DLP products forum