DLPA100: The minimum color segment degrees which DLPC3440 and DLPA100 can support

Hidenori Katagiri

Part Number: DLPA100

Hi TI,

I have a question about a color wheel design.

My optical design team is going to decide each segment degrees of a color wheel R, G, B for the next design and they are wondering what is the minimum degrees which DLPC3440 and DLPA100 can support?

According to the datasheet of DLPC3440, 14%(50.4deg) is described as the minimum degrees in the case of 180Hz CW speed in figure 25 page 44.

What if it is 120Hz CW speed?

It would be helpful for me if you could let me know.

Best regards,

Hide

over 3 years ago

0 Matt Soucek over 3 years ago

TI__Expert 3700 points

Hello Hide. I am going to assign your question to our Pico Display team. I am sure they will be able to help you out efficiently.

Regards,

Matt

0 Philippe Dollo over 3 years ago in reply to Matt Soucek

TI__Mastermind 28005 points

Matt,

Thank you.

Hide,

The team will investigate what can be supported on this chipset and get back to you in a couple of days.

Regards,

Philippe

0 Philippe Dollo over 3 years ago in reply to Philippe Dollo

TI__Mastermind 28005 points

Hide-san,

I believe I have assisted you with your issues offline. If you have further questions don't hesitate to reach out.

Best Regards,

Philippe

DLP®︎ products

DLP products forum

DLPA100: The minimum color segment degrees which DLPC3440 and DLPA100 can support