• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 27 subscribers
  • Views 215 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DLP2010EVM-LC: Does DLPDLC-GUI and DLP2010EVM-LC-FW software work with only display board from DLP2010EVM, without motherboard?

Vladimir Zhukov
Intellectual 370 points

Part Number: DLP2010EVM-LC

Hello!

I want to independently assemble a desplay board from the DLP2010EVM-LC set.

I have a question:
Does DLPDLC-GUI and DLP2010EVM-LC-FW software work with only display board from DLP2010EVM, without motherboard?

What other difficulties may I have when connecting the software to the display board?

Will I be able to write 1D, 2D pattern without motherboard in DLPC3470?

Best regards, Vladimir Zhukov.

  • 0
    TI__Genius 9971 points

    Hello Vladimir, 

    Welcome to TI E2E forums. 

    It is possible to design your custom board. Your design should be based on DLPC3470+DLP2010LC+ DLPA2000/2005/3000 combination. Please explore the firmware selector tool to checkout the various DLPC3470 firmware that are supported. (software-dl.ti.com/.../)

    All the operating modes supported by DLPC3470 will be available for use in your custom design as well. 

    Regards,

    Mayank